RC 40 Reciprocating - 30 to 40 CFM
Vanair's RC 40 hydraulic-powered 40 CFM reciprocating compressor offers over 33% more power than other brands.
Specifications | |||
Capacity (CFM) | 30 | 35 | 40 |
Normal Hyd. Press. (gpm) | 14 | 14 | 14 |
Hydraulic Flow (psi) | 2000 | 2000 | 2000 |
Air Pressure (psi) | 175 | 150 | 100 |
Compressor Dimensions with fittings (in.) | 22.0W x 32.0L x 24.0H | ||
Dry Weight (lbs.) | 385 |
HYDRAULIC SYSTEM REQUIREMENTS
- 3000 psi rated hydraulic pump
- Pressure relief set at 3200 psi
- Hydraulic reservoir at 2.5 times the oil flow (recommended)
- Dedicated gear pump
- Additional oil cooler for high-ambient temperatures
- When mounting compressor, allow for adequate ventilation
SPECIAL FEATURES
Compressor
- Two-stage, four-cylinder reciprocating type
- Air compressor and hydraulic hose access on both sides of canopy
- Integral hydraulic oil cooler
- V-Belts driven by hydraulic motor
- Added features
- Powder-coated, galvanneal sheetmetal enclosure
- Rugged, cast-iron crankcase
- Corrosion-resistant steel valves
- Tapered roller-type main bearings
- Balanced crankshaft
- Weight-matched balanced pistons
- High-flow valves
- Lightweight connecting rods
- Interstage cooling
- Supply connections
- Hydraulic oil in - 3/4" 37° JIC
- Hydraulic oil out - 1" 37° JIC
- Electrical 12-volt DC
- Vibration isolation for compressor and drive system for quiet operation
Compressor Control System
- Integral on-off manifold with solenoid diverter valve and hydraulic pressure relief valves
Safety Equipment
- Air pressure-relief safety valve
- Hydraulic oil pressure-relief valve